Hi, may I ask, is the 00% ratio based on the products that have already been filled or is it derived from testing the unfinished bulk products?
Because according to the third question I raised, 0. Does your company conduct any tests upon receiving the goods ? In the tests you conducted, the proportions were not that high.
In this regard, we suggest the following handling measures.

Test + Solution: 0. (0) Place 000 pcs of filled products flat and let them stand for 0 to 0 days. If no side leakage is found, proceed with the vacuum test.
If side leakage is detected during the vacuum test, the standing time should be extended to 0 days.
(0) If side leakage is found, all filled products can be placed flat and left to stand to identify the leaking tubes.
(This method can help identify the defective tubes with side leakage.)

Supplier Resolution : 0. Adjust the ultrasonic line of the bottle and the ring section mold, increase its width and height, and make it better integrated. Improve worker operation standards.

If you have the other questions or ideas, please feel free to ask .
Looking forward to your reply , thank you .