İngilizce

0. Remove the brake fluid from the reservoir by using a suction pump.
0. Fill the reservoir with clean brake fluid.
0. Attach a vinyl tube to the farthest bleeder screw and place
the other end of the tube in a clear container.
0. Remove all old brake fluid from the brake lines by loosening the bleeder screw and pumping the brake pedal until ..
only clean fluid is seen. The reservoir should be kept about
0/0 full during bleeding to prevent air from reentering the
lines.
0. Perform the above for all bleeder screws.
0. Fill the reservoir to the specified levels.

Türkçe

0. Bir emme pompası kullanarak fren sıvısını hazneden çıkarın.
0. Hazneyi temiz fren hidroliği ile doldurun.
0. En uzak hava alma vidasına bir vinil tüp takın
ve tüpün diğer ucunu temiz bir kaba yerleştirin.
0. Hava alma vidasını gevşetip fren pedalına ..
sadece temiz sıvı görünene kadar pompalayarak tüm eski fren hidroliğini fren hatlarından çıkarın . Rezervuar,
havanın
hatlara tekrar girmesini önlemek için kanama sırasında yaklaşık 0/0 dolu tutulmalıdır .
0. Tüm hava alma vidaları için yukarıdaki işlemleri yapın.
0. Rezervuarı belirtilen seviyelere kadar doldurun.

(5000 karakter kaldı)
İngilizce
Türkçe

İçindekiler

Son çeviriler

devamını göster›
ADS - REKLAMLAR