İngilizce

(P1)
Put stick to the center position, press rudder trimmer right, and then red and green LED always on
means sticks calibrate successful.
1.3 Guidelines to mount the servos, receiver and battery
• Make certain the alignment tab on the battery, switch and servo connectors is orient correctly and ‘key’ into the corresponding notch in the receiver or connectors before plugging them in.When unplugging connectors, never pull on the wires. Always pull on the plastic connector instead.
• Receiver’s Antenna: In generally receiver’s antenna is longer than remote control,don’t break or retract it,otherwise shorten the control distance.The antenna must be kept away from conductive materials,such as metal. Please make distance test before flying.
•If your aileron servos are too far away to plug into the receiver,use an aileron extension cord

Türkçe

(P1)
Put stick to the center position, press rudder trimmer right, and then red and green LED always on
means sticks calibrate successful.
1.3 Guidelines to mount the servos, receiver and battery
• Make certain the alignment tab on the battery, switch and servo connectors is orient correctly and ‘key’ into the corresponding notch in the receiver or connectors before plugging them in.When unplugging connectors, never pull on the wires. Always pull on the plastic connector instead.
• Receiver’s Antenna: In generally receiver’s antenna is longer than remote control,don’t break or retract it,otherwise shorten the control distance.The antenna must be kept away from conductive materials,such as metal. Please make distance test before flying.
• Aileron servolarınız alıcıya takılmayacak kadar uzaksa, bir aileron uzatma kablosu kullanın.

Çevirmek istediğiniz metni girin: (5000 karakter kaldı)

İngilizce
Türkçe
Profesyonel çeviri:
Kullanım SözleşmesiSitene Ekle