İngilizce

Manual Metal Arc Welding
This welding process uses an electric arc as the heat source. The arc is established between a
flux-coated, filler metal rod and the workpiece, which are connected to an electrical power
source so that they are the anode and cathode electrodes of the circuit. When the power is
switched on, the heat, generated by the resulting arc, melts the flux-coated electrode and the
edges of the parent material to form a weld pool. The temperature of the arc is approximately
0000°C to 0000°C.

Türkçe

Manuel Metal Ark Kaynağı
Bu kaynak işleminde ısı kaynağı olarak bir elektrik arkı kullanılır. Ark, akı kaplı, dolgu metal çubuk ile bir elektrik güç kaynağına bağlanan iş parçası arasında, devrenin anot ve katot elektrotları olacak şekilde oluşturulur. Güç açıldığında
, ortaya çıkan ark tarafından üretilen ısı, eritken kaplı elektrotu ve ana malzemenin
kenarlarını eriterek bir kaynak havuzu oluşturur. Arkın sıcaklığı yaklaşık
0000°C ila 0000°C arasındadır.

(5000 karakter kaldı)
İngilizce
Türkçe

İçindekiler

Son çeviriler

devamını göster›